Hard Jaw Set for Power Operated Chucks
Hard jaw set for GMT, Airtech, Kitagawa, Sonalkar, SMW, Rohm, Howa, Forkhart brand power-operated Chucks from 100 to 630 x 3 jaw.
Features :
Rotating & Pipe Rotating Centres
• The Rotating Centres are made to IS Specifications. The rotating Centres are capable of withstanding axial loads, thrust and radial loads.
;The housing (or body) of the rotating Centres are made of low carbon alloy steel,
hardened to 30-40 HRC. The spindles are made of ball-bearing alloy steel, and hardened to 60-62 HRC.
• The spindles are mounted with bearings to ensure smooth running. The housings are provided with oil nipples for frequent lubrication, to maximise life of bearings.
• The alignment between the shank and front spindle is kept within 0.015 mm. And the cone runout (w.r.t.cone and taperangle) is kept within 0.005.
Plain Centres with Morse Taper & Carbide Tipped Centres Plain Centres with Morse Taper • The Plain Centres are made from carbon-chromium alloy steel, hardened to 62 HRC to withstand wear. The Plain Centres have a high surface finish to allow maximum bearing on master gauges. The runout with respect to cone and taper angle is kept within 0.005 mm. |
